Mech Bay.   Posted by Clan Wolf.Group: 0
James Gordon
 Negotiator, 52 posts
 Callsign:Phantom
 Urbanmech UM-H-X
Tue 19 Feb 2013
at 19:29
Re: Mech Bay
"Well, I can buy the Spider right now. As for the other work, strip the probe, erppc and ECM suite from the Urbanmech and place it in the new one. No need to buy a ERPPC and other gear if I already have it. Then there will be a striped out Urban that someone can modify as they want. how does that sound?" he asks
James Trix
 NPC, 51 posts
 Senior
 Tech Officer
Tue 19 Feb 2013
at 20:11
Re: Mech Bay
James had noticed something quite wrong with the notes he was holding and the estimates that was displayed on his noteputer. "Hmm. Wrong Pilot." He continued to burrow through his documents inside his digital book looking for the right one, "It seems I had you looking at someone else's estimates. My mistake. Here's your correct estimate."
Estimated Fee:
Spider Purchase:          2,238,405 C-Bills
Tech Hire:                   50,000
Urban ER PPC x1 Removal     150,000
Urban Probe x1 Removal       45,000
Urban ECM x1 Removal         45,000
CT: ML x1                    30,000 [Removal]
CT: ER PPC x1               150,000 [Insert]
LT: ML x1                    30,000 [Removal]
LT: Beagle Probe x1          45,000 [Insert]
RT: MPL x1                   60,000 [Removal]
RT: ECM Suite x1              FREE  [Insert]
LA:                          0.0
RA:                          0.0
LL:                          0.0
RL:                          0.0
Armor+ [CT by 0.5]          200,000 [Upgrade]

---------------------------------------------------------
Total Fee:                3,043,405 C-bills
"I apologize for the mix up, Still want to sell your Urban?"

This message was last edited by the player at 20:11, Tue 19 Feb 2013.

James Gordon
 Negotiator, 53 posts
 Callsign:Phantom
 Urbanmech UM-H-X
Tue 19 Feb 2013
at 20:29
Re: Mech Bay
"Yes, please sell whats left of the Urbanmech. I will keep the extra heat sik and the lasers for something later. Hum, it looks like you forgot to add in removing the extra Heat sink in your numbers." James says as he looks over the readout
James Trix
 NPC, 52 posts
 Senior
 Tech Officer
Tue 19 Feb 2013
at 21:03
Re: Mech Bay
"It just really isn't my day, also noticed a discrepancy on the Mech's loadout. There was an additional heat sink on the spider that didn't register on the noteputer which it only displayed 12, probably a glitch. It doesn't make a difference on your intended load. the sudden will just add an extra 30,000 fee to remove it."

"Also a stripped out Mech will change its base price."

Current Loadout:
Engine, Internals, Gyros:  7.5 Tons
HS: x13                   13.0
HD:                        0.0
CT: ML x1                  1.0
LT: ML x1                  1.0
RT: MPL x1                 2.0
LA:                        0.0
RA:                        0.0
LL:                        0.0
RL:                        0.0
---------------------------------------------------------
Total Tons:               24.5 Tons (5.5 Free)

Suggested Loadout:
Engine, Internals, Gyros:  7.5 Tons
HS: x2                     2.0
HS: x11                   11.0
HD:                        0.0
CT: ML x1                  1.0
CT: ER PPC x1              7.0
LT: ML x1                  1.0
LT: Beagle Probe x1        1.5
RT: MPL x1                 2.0
RT: Guardian ECM x1        1.5
LA:                        0.0
RA:                        0.0
LL:                        0.0
RL:                        0.0
---------------------------------------------------------
Total Tons:               28.5 Tons (1.5 Free)

Estimated Fee:
Urban Resell:              -863,850
Spider Purchase:          2,238,405 C-Bills
Tech Hire:                   50,000
Heat Sink x2 Removal         60,000
Urban ER PPC x1 Removal     150,000
Urban Probe x1 Removal       45,000
Urban ECM x1 Removal         45,000
CT: ML x1                    30,000 [Removal]
CT: ER PPC x1               150,000 [Insert]
LT: ML x1                    30,000 [Removal]
LT: Beagle Probe x1          45,000 [Insert]
RT: MPL x1                   60,000 [Removal]
RT: ECM Suite x1              FREE  [Insert]
LA:                          0.0
RA:                          0.0
LL:                          0.0
RL:                          0.0
Armor+ [CT by 0.5]          200,000 [Upgrade]

---------------------------------------------------------
Total Fee:                2,239,555 C-bills

"Please double check everything before I throw away this noteputer."

[Urban Value Change then Resell]
2,813,200 - 1,750,000 (ER PPC, ECM, PROBE): 1,063,200
1,063,200 x .65 (of base value): 691,080
691,080 + 172,770 (25% negotiator): 863,850

[Spider Value Change]
Stock Shop Value: 2,984,540
Weapons Removed Value: 305,000
Weapons Added Value: 1,750,000
 2,984,540 + 1,445,000:4,629,540
[place the new price in your character sheet]

This message was last edited by the player at 21:31, Tue 19 Feb 2013.

James Gordon
 Negotiator, 54 posts
 Callsign:Phantom
 Urbanmech UM-H-X
Tue 19 Feb 2013
at 21:22
Re: Mech Bay)
"Other than documenting the additional weight on the chest for the extra armor, it looks good to go. (the one ton for the armor in the CT)" James says as he pats the old mech good by before heading to the lounge for a drink
Jacob Lin
 Negotiator, 79 posts
 Roach
 COM-2D Commando
Tue 19 Feb 2013
at 23:29
Re: Mech Bay)
Jacob approached the technician that called out to him, seemingly eager to talk about mechs.

"I heard there is a Wasp among the stocks available for sale," Jacob said when he is within proper conversation range with the technician, "I am interested in purchasing it, please."
Ike Duran
 Wealthy, 121 posts
 Foehammer
 Hollander BZK-F3
Tue 19 Feb 2013
at 23:45
Re: Mech Bay)
Ike headed into the office towards James and half held out the pad he was holding, hesitating a little, "I was umm ... thinking of moding my mech a bit and ... hmmm. Yeah well anyway, this was what I had in mind."

New Loadout:
Engine, Internals, Gyros  10 Tons
Heat Syncs x5              5 Tons (Removed)
Laser Heat Sync x3       4.5 Tons (Added)
Heat Sync x1               1 Ton
Small Laser (RT)         0.5 Tons (Removed)
Small Laser              0.5 Tons
Medium Laser               1 Ton
Medium Laser               1 Ton (Added)
Gauss Rifle               15 Tons
Gauss Rifle Ammo           2 Tons
----------------------------------------------------
Total Tons:               35 Tons (0 Free)


Estimated Fee:
Laser Heat Sync Purchase x3  150,000 C-Bills
Medium Laser Purchase         80,000
Heat Sync Removal x5         150,000
Small Laser Removal           15,000
Medium Laser Insertion (RT)   30,000
Laser Heat Sync Insertion x3 135,000
----------------------------------------------------
Total Cost:                  560,000
James Trix
 NPC, 53 posts
 Senior
 Tech Officer
Tue 19 Feb 2013
at 23:49
Re: Mech Bay)
"Lots of pilots asking around for that Mech." The Senior Tech took note of his tablet and browsed around for the inventory listing. "You're in luck, last one in stock. Here, take a look." He handed him the noteputer with the specs.

Wasp Purchase:          3,991,820
       H
     [4/4]
    LT   RT      [LT/RT] JJ
  [4/4] [4/4]    [LL] MML-5 (48/40)
  LA   C   RA    [RA] ER ML, SPL
[3/3][8/8][3/3]  [CT] MASC
    LL   RL
  [4/4] [4/4]
Jacob Lin
 Negotiator, 80 posts
 Roach
 COM-2D Commando
Wed 20 Feb 2013
at 01:01
Re: Mech Bay)
"I see..." Jacob remarked as he looked up his noteputer to compare information about the Wasp, "I heard from other sellers of mechs in the sector that the price is actually much lower than what is listed here, something about how the mech looks or its reputation giving the mech its listed price..."

"Also, I would like to know if the mech still has some space for additional equipment," with that, Jacob offers his cred stick to check.

This message was last edited by the player at 02:10, Wed 20 Feb 2013.

James Trix
 NPC, 54 posts
 Senior
 Tech Officer
Wed 20 Feb 2013
at 02:17
Re: Mech Bay)
James, took hold of Ike's note and browsed through the suggestions, "I'll have it setup by tomorrow. I just need your cred stick for purchase confirmation and you can be on your way."

The Tech focuses his attention again towards the pilot who was inquiring for the wasps. "I think I'll be able to give you a discount on it, just to take this thing off of my storage space." He then took hold of his noteputer and pushed it few times before handing it to the pilot. "Here's the Load-out Specs and your estimate with the discount."
Current Loadout:
Engine, Internals, Gyros:  7.5 Tons
HS: x10                   10.0
HD:                        0.0
CT: MASC                   3.0
LT:                        0.0
RT:                        0.0
LA:                        0.0
RA: SPL, ER ML             2.0
LL: MML-5 w/ Ammo (48/40)  5.0
RL:                        0.0
---------------------------------------------------------
Total Tons:               27.5 Tons (2.5 Free)

Estimated Fee:
Wasp Purchase:             3,991,820
25% Discount:                997,955
----------------------------------------------------
Total Cost:                2,993,865

This message was last edited by the player at 02:17, Wed 20 Feb 2013.

Ike Duran
 Wealthy, 132 posts
 Foehammer
 Hollander BZK-F3
Wed 20 Feb 2013
at 02:18
Re: Mech Bay)
"Ok thanks Mr Trix," Ike said handing over his cred stick and then leaving the bay once the transaction was complete.
Jacob Lin
 Negotiator, 87 posts
 Roach
 COM-2D Commando
Wed 20 Feb 2013
at 02:23
Re: Mech Bay)
"I see... It is just as they said," Jacob replied with a nod as he checked on the specs, "It does not look like I can add anything else at this point, but I will go ahead and buy the Wasp then."
James Trix
 NPC, 55 posts
 Senior
 Tech Officer
Wed 20 Feb 2013
at 02:34
Re: Mech Bay)
"The mech will be delivered to your hanger shortly, now all I need is the payment to finish the knot. Your cred stick please if you will" once it has been handed, James quickly updated the balance from the pilot's account and took what was needed from it. "Enjoy." as he hands the stick back to the pilot.
Jacob Lin
 Negotiator, 88 posts
 Roach
 COM-2D Commando
Wed 20 Feb 2013
at 02:49
Re: Mech Bay)
"Much thanks, I'll make sure to come back to make improvements once I have enough creds," Jacob said, handing over his cred stick to complete the payment. Once that is done, he gives a bow before heading back to check what the others are doing.
Alicia Wilds
 Wealthy, 43 posts
 Callsign: Angel
Fri 22 Feb 2013
at 07:59
Re: Mech Bay)
She stepped into the mech bay, taking another deep breath.  The smells always seemed to calm her down, and she took the opportunity to stretch before looking around.  She had another loadout idea in mind- it would cost a bit, but... it was going to be worth it.

"Hey, James!  You around?"

She glanced at the loadout she'd figured out while loafing about in the briefing room:

-Remove Medium Lasers and place into storage.
-Remove Heat Sinks and place into storage.
-Purchase and install seven Laser Heat Sinks
-Purchase four Extended Range Medium Lasers
-Install ER MLs on Head, LT, LA, RA
-Purchase and install Advanced Sensors

Hopefully it wouldn't come out to too much...
James Trix
 NPC, 56 posts
 Senior
 Tech Officer
Fri 22 Feb 2013
at 18:34
Re: Mech Bay)
"Ah, Alicia. Welcome Back and here's the estimate."

Current Loadout:
Engine, Internals, Gyros:  5.0 Tons
HS: x13                   10.0
HD: ML x1                  1.0
CT: Streak SRM4            3.0
LT:                        0.0
RT: ECM                    1.5
LA: ML x1                  1.0
RA: ML x1                  1.0
LL:                        0.0
RL:                        0.0
---------------------------------------------------------
Total Tons:               22.5 Tons (2.5 Free)

Suggested Loadout:
Engine, Internals, Gyros:  5.0 Tons
HS: x13                   10.0
Laser HS: x7              10.5
HD: ML x1                  1.0
HD: ER ML x1               1.0
CT: Streak SRM4            3.0
LT: ER ML x1               1.0
RT: ECM                    1.5
LA: ML x1                  1.0
LA: ER ML x1               1.0
RA: ML x1                  1.0
RA: ER ML x1               1.0
LL:                        0.0
RL:                        0.0
Advanced Sensors           1.5
---------------------------------------------------------
Total Tons:               24.5 Tons (0.5 Free)

Estimated Fee:
Advanced Sensor Purchase:   350,000
ER ML Purchase:             720,000
Tech Hire:                   50,000
Heat Sink x13 Removal       390,000
Laser Heat Sink x7 Insert   315,000
HD: ML x1                    30,000 [Removal]
HD: ER ML x1                  FREE  [Insert]
LT: ER ML x1                 30,000 [Insert]
RT:                           0.0
LA: ML x1                    30,000 [Removal]
LA: ER ML x1                  FREE  [Insert]
RA: ML x1                    30,000 [Removal]
RA: ER ML x1                  FREE  [Insert]
LL:                           0.0
RL:                           0.0
Sensor+                      45,000 [Insert]
---------------------------------------------------------
Total Fee:                1,960,000 C-bills
Clayton Winters
 player, 4 posts
 Callsign: Frost
 Mon-67 Mongoose
Fri 22 Feb 2013
at 18:56
Re: Mech Bay)
Clayton waited in the hall munching on a cold roasted meat sandwich of some kind of dead animal that passed for beef on this planet, covered in processed lunch spread and layered with wilted green stuff that was certainly not lettuce from his mothers garden. He waited patiently as the crowd expanded and thinned till he could have a minute along with the man inside. The man who name plate on the door matched the name on the envelope that he was carrying so treasured. <James Trix Esquire>
Alicia Wilds
 Wealthy, 44 posts
 Callsign: Angel
Fri 22 Feb 2013
at 19:12
Re: Mech Bay)
"Looks good.  Go ahead and do it to it, then.  I figured I could use some better striking power from afar, and this way I'll actually be able to go ahead and hit from a distance instead of having to close in close."

Her eyes scanned the bill and she nodded, handing over her credstick so he could deduct the balance.
Clayton Winters
 player, 5 posts
 Callsign: Frost
 Mon-67 Mongoose
Fri 22 Feb 2013
at 19:23
Re: Mech Bay)
When the curvaceous young lady with the beautiful red hair left, Clayton slipped inside the cluttered office and closed the door behind him. Looking at the man behind the desk as quietly asked.

You are James Trix ?

When he responded affirmatively, Clayton placed the letter, unopened, on the desk in front of him.

I was told to see you directly when I got to Outreach, I did stop for a shot of whiskey and a sandwich on the way.

Then Clayton sat down and waited.
James Trix
 NPC, 57 posts
 Senior
 Tech Officer
Fri 22 Feb 2013
at 20:47
Re: Mech Bay)
James took hold of her cred stick and registered the differences for her hiring fees just as we about to finish, he noticed a new one entering his office. They never tire. "Clayton Winters.. says here you have rights to a Hatchetman but due to your debts the bank is currently in possession of that Mech so instead you'll be loaning a Mongoose from us as you work of your debt for the bank.. Hm. I see." James sized up the man before turning his attention towards the female pilot.

"Alicia. Is there any opening for the Aces Wilds unit right now? Seems like this guy needs a job and juudging by this letter.. He needs it fast."
Alicia Wilds
 Wealthy, 45 posts
 Callsign: Angel
Fri 22 Feb 2013
at 20:51
Re: Mech Bay)
"Hmmm... well... we do need to fill out a lance to go up against the Davions... they want to test some of thier lances against us... job pays three-quarters of a mill... I guess we could use him.  Stop by the briefing room and we'll get you sorted out. I hope you know how to drive that Mongoose... it's going to be two lances on one, and you'd better go all out out there."

She blew another errant strand of hair out of her eyes, and looked him over.

"Just don't be late."
Clayton Winters
 player, 6 posts
 Callsign: Frost
 Mon-67 Mongoose
Fri 22 Feb 2013
at 21:06
Re: Mech Bay)
Clayton looked at the pilot and thought about it for a second, but only a second.

LATE has never been one of my problems. I am of course happy for the work and happy for the introduction Mister Trix.

This message was last edited by the player at 21:07, Fri 22 Feb 2013.

Kazimir Glazkov
 Noble, 70 posts
 8/21 Callsign: Rock
 Skill:[Rush] Mech:Kit Fox
Sat 23 Feb 2013
at 19:02
Re: Mech Bay)
Kaz casually left his note on the Technician's table as he entered the office, "I will be transferring to this new Mech, once I have it repaired. I think I'll be hiring one of those newer teams. A fresher opinion so to speak."

02:54, Today: Kazimir Glazkov rolled 8 using 1d10. Mech Repair.  Success
02:57, Today: Kazimir Glazkov rolled 6 using 1d10. Medium Laser Repair. Success
02:56, Today: Kazimir Glazkov rolled 4 using 1d10. Medium Laser. Fail
02:56, Today: Kazimir Glazkov rolled 7 using 1d10. ER PPC Repair. Fail


"If one of those team can't comprehend how to fix a few those components then I'll hire a much experienced one. If they still can't do it, then I'll try another time."

03:00, Today: Kazimir Glazkov rolled 8 using 1d10. Medium Laser Repair. Success
03:00, Today: Kazimir Glazkov rolled 3 using 1d10. Medium Laser Repair. Fail

Hire Green Repair Team:      100,000
Hire Green Technical Team:    30,000
Hire Veteran Technical Team:  60,000
---------------------------------------------
Total Fee:                   190,000
James Trix
 NPC, 58 posts
 Senior
 Tech Officer
Sat 23 Feb 2013
at 19:19
Re: Mech Bay)
"Excuse me for a moment," He tells Clayton and tried to call after the hasty pilot before he leaves. "Hold on there Kazimir, you do realize your Galahad won't have anything in him since its been stripped of everything after it was salvaged. You'll have to tell me how you want it set up."
Kazimir Glazkov
 Noble, 72 posts
 10/21 Callsign: Rock
 Skill:[Rush] Mech:Galahad
Sat 23 Feb 2013
at 21:49
Re: Mech Bay)
"The loadout I want is in the note on your desk, toodles."
Loadout:
Engine, Internals, Gyros: 27.5 Tons
HS: Laser HS x4            6.0
HD:                        0.0
CT: SL                     0.5
LT: AC/10 (10)            13.0
RT: Streak SRM-6 (15)      5.5
LA: ER PPC                 7.0
RA:                        0.0
LL:                        0.0
RL:                        0.0
---------------------------------------------------------
Total Tons:               59.5 Tons (0.5 Free)

Estimated Fee:
Laser HS Purchase x4:        200,000
Streak SRM6 Purchase:        600,000
AC/10 Purchase:              360,000
SL Purchase:                  40,000
Tech Hire:                    50,000
Laser Heat Sink x7 Insert    180,000
CT: SL                        15,000
LT: AC/10 (10)               360,000
RT: Streak SRM-6 (15)        135,000
LA: ER PPC                   210,000

---------------------------------------------------------
Total Fee:                 2,150,000 C-bills

But before he left the room, Kaz turned around and smiled, "I believe now you owe me this time, James."

This message was last edited by the player at 22:25, Sat 23 Feb 2013.